PLANET WGSW-48040HP - Manual (Page 185)

Command Guide of WGSW-48040HP
Default:
Disabled
Usage Guide:
To enter IPMC profile mode
Example:
To enter IPMC profile mode (planet)
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)#
4.2.74.1 default range
Command:
default range
default Set a command to its defaults
range A range of IPv4/IPv6 multicast addresses for the profile
Range entry name
Default:
None
Usage Guide:
To default IPMC Profile Rule for specific IPMC Profile
Example:
To default IPMC Profile Rule (Entry 1) for specific IPMC Profile (planet)
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)# default range 1
4.2.74.2 description
Command:
description
description Additional description about the profile
Description for the designated IPMC filtering profile
-185-