PLANET WGSW-48040HP - Manual (Page 256)

Command Guide of WGSW-48040HP
Switch#
4.2.162.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)#exit
Switch (config)#
4.2.162.4 host
Command:
host [ | | ] { informs |
traps }
host host configuration
hostname of SNMP trap host
IP address of SNMP trap host
IP address of SNMP trap host
UDP port of the trap messages
informs Send Inform messages to this host
traps Send Trap messages to this host
Default:
None
-256-