PLANET WGSW-48040HP - Manual (Page 254)

Command Guide of WGSW-48040HP
4.2.161 snmp-server engine-id
Command:
snmp-server engine-id local
snmp-server Set SNMP server's configurations
engine-id Set SNMP engine ID
local Set SNMP local engine ID
local engine ID
Default:
None
Usage Guide:
To configure the Engine IDof SNMP
Example:
To configure the Engine ID (1234567890) of SNMP
Switch# configure terminal
Switch (config)# snmp-server engine-id local 1234567890
4.2.162 snmp-server host
Command:
snmp-server host
snmp-server Set SNMP server's configurations
host Set SNMP host's configurations
Name of the host configuration
Default:
None
Usage Guide:
To enter the SNMP host mode
Example:
To enter the SNMP host mode (planet)
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)#
-254-