PLANET WGSW-48040HP - Manual (Page 209)

Command Guide of WGSW-48040HP
Usage Guide:
To enable log server
Example:
To enable log server
Switch# configure terminal
Switch (config)# logging on
4.2.98 loop-protect
Command:
loop-protect
loop-protect Loop protection configuration
Default:
Disabled
Usage Guide:
To enable Loop Protection
Example:
To enable Loop Protection
Switch# configure terminal
Switch (config)# loop-protect
4.2.99 loop-protect shutdown-time
Command:
loop-protect shutdown-time <0-604800>
loop-protect Loop protection configuration
shutdown-time Loop protection shutdown time interval
<0-604800> Shutdown time in second
Default:
180
-209-