112 spanning-tree mst cost, 113 spanning-tree mst cost – PLANET WGSW-48040HP User Manual
Page 129

Command Guide of WGSW-48040HP
4.2.45.112 spanning-tree mst
Command:
spanning-tree mst
spanning-tree Spanning Tree protocol
mst STP bridge instance
cost STP Cost of this port
auto Use auto cost
Default:
Auto
Usage Guide:
To configure Path Cost of CIST / MST Normal Port Configuration for specific interface
Example:
To enable Path Cost (100) of CIST / MST Normal Port Configuration (CIST) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree mst 0 cost 100
4.2.45.113 spanning-tree mst
Command:
spanning-tree mst
spanning-tree Spanning Tree protocol
mst STP bridge instance
port-priority STP priority of this port
auto Use auto cost
Default:
Auto
Usage Guide:
To configure Path Cost of CIST / MST Normal Port Configuration for specific interface
Example:
-129-