169 transport email smtp-server, 170 transport email to – PLANET WGSW-48040HP User Manual
Page 270

Command Guide of WGSW-48040HP
Default:
N/A
Usage Guide:
To configure SMTP sender's email address and title of the email
Example:
To configure SMTP sender's email address ([email protected]) and title of the email (syserror)
Switch# configure terminal
Switch (config)# transport email from [email protected] subject syserror
4.2.169 transport email smtp-server
Command:
transport email smtp-server {
transport Enable or disable transport email function.
email Enable or disable transport email function.
smtp-server Set the SMTP server name or IP address of the SMTP server
port port
<1-65535> port_number: Specifies the port number. The range is from 1 to 65535. The default port
number is 25.
Default:
N/A
Usage Guide:
To configure SMTP Server address and port number.
Example:
To configure SMTP Server address (mail.planet.com.tw) and port number (123)
Switch# configure terminal
Switch (config)# transport email smtp-server mail.planet.com.tw port 123
4.2.170 transport email to
-270-