PLANET WGSW-48040HP - Manual (Page 161)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# ip arp inspection translate interface GigabitEthernet 1/1 1
00:11:22:33:44:55 192.168.0.18
4.2.51 ip arp inspection vlan
Command:
ip arp inspection vlan logging all | deny | permit
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
vlan arp inspection vlan setting
arp inspection vlan list
logging ARP inspection vlan logging mode config
all log all entries
deny log denied entries
permit log permitted entries
Default:
N/A
Usage Guide:
To configure VLAN mode of ARP inspection.
Example:
To configure VLAN mode (VLAN 1, Log type: Permit) of ARP inspection.
Switch# configure terminal
Switch (config)# ip arp inspection vlan 1 logging permit
4.2.52 ip dhcp excluded-address
Command:
ip dhcp excluded-address
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
-161-