PLANET WGSW-48040HP - Manual (Page 363)

Command Guide of WGSW-48040HP
4.20.90 show snmp
Command:
show snmp
show Show running system information
snmp Display SNMP configurations
Default:
N/A
Usage Guide:
To display the SNMP information.
Example:
To display the SNMP information
Switch # show snmp
SNMP Configuration
SNMP Mode : enabled
SNMP Version : 2c
Read Community : public
Write Community : private
Trap Mode : disabled
Trap Version : 1
SNMPv3 Communities Table:
Community : public
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community : private
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
SNMPv3 Users Table:
User Name : default_user
Engine ID : 800007e5017f000001
Security Level : NoAuth, NoPriv
Authentication Protocol : None
Privacy Protocol : None
-363-