PLANET WGSW-48040HP - Manual (Page 346)

Command Guide of WGSW-48040HP
LOL: FALSE
DHOLD: TRUE
SSM State is:
Interface Tx SSM Rx SSM Mode
GigabitEthernet 1/1 QL_NONE QL_LINK Master
4.20.68 show ntp status
Command:
show ntp status
show Show running system information
ntp Configure NTP
status status
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.0.44
2
3
4
5
4.20.69 show platform phy
Command:
show platform phy [ interface ( [ ] ) ]
-346-