PLANET WGSW-48040HP - Manual (Page 180)

Command Guide of WGSW-48040HP
4.2.65 ip name-server dhcp
Command:
ip name-server dhcp
ip Internet Protocol
name-server Domain Name System
dhcp Dynamic Host Configuration Protocol
Default:
None
Usage Guide:
To configure DNS IP address via DHCP Server.
Example:
To configure DNS IP address via DHCP Server.
Switch# configure terminal
Switch (config)# ip name-server 8.8.8.8
4.2.66 ip name-server dhcp interface vlan
Command:
ip name-server dhcp interface vlan
ip Internet Protocol
name-server Domain Name System
dhcp Dynamic Host Configuration Protocol
vlan VLAN Interface
VLAN identifier(s): VID
Default:
None
Usage Guide:
To configure DNS IP address via specific VLAN DHCP Server.
Example:
To configure DNS IP address via specific VLAN 5 DHCP Server.
Switch# configure terminal
Switch (config)# ip name-server dhcp interface vlan 5
-180-