PLANET WGSW-48040HP - Manual (Page 202)

Command Guide of WGSW-48040HP
Usage Guide:
To configure Datum type of LLDP
Example:
To configure Datum type (nad83-mllw) of LLDP
Switch# configure terminal
Switch (config)# lldp med datum nad83-mllw
4.2.86 lldp med fast
Command:
lldp med fast <1-10>
lldp LLDP configurations.
med Media Endpoint Discovery
fast Number of times to repeat LLDP frame transmission at fast start.
Default:
4
Usage Guide:
To configure frame transmission time of LLDP
Example:
To configure frame transmission time (6) of LLDP
Switch# configure terminal
Switch (config)# lldp med fast 6
4.2.87 lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors ] | [meters ]
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
altitude Altitude parameter
floors Specify the altitude in floor.
Altitude value.
-202-