PLANET WGSW-48040HP - Manual (Page 150)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping querier election
4.2.46.14 ip igmp snooping query-interval
Command:
ip igmp snooping query-interval
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
query-interval Query Interval in seconds
1 - 31744 seconds
Default:
125
Usage Guide:
To configure Querier-interval of IGMP snooping for specific VLAN
Example:
To configure Querier-interval (600 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping query-interval 600
4.2.46.15 ip igmp snooping query-max-response-time
Command:
ip igmp snooping query-max-response-time
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
query-max-response-time Query Response Interval in tenths of seconds
0 - 31744 tenths of seconds
-150-