PLANET WGSW-48040HP - Manual (Page 245)

Command Guide of WGSW-48040HP
Default:
None
Usage Guide:
To configure the NAS-IP-Address
Example:
To configure the NAS-IP-Address (7.7.7.7)
Switch# configure terminal
Switch (config)# radius-server attribute 4 7.7.7.7
4.2.148 radius-server attribute 95
Command:
radius-server attribute 95
radius-server Configure RADIUS
95 NAS-IPv6-Address
Default:
None
Usage Guide:
To configure the NAS-IPv6-Address
Example:
To configure the NAS-IPv6-Address (2001::7788)
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788
4.2.149 radius-server deadtime
Command:
radius-server deadtime
radius-server Configure RADIUS
deadtime Time to stop using a RADIUS server that doesn't respond
Time in minutes
-245-