PLANET WGSW-48040HP - Manual (Page 341)

Command Guide of WGSW-48040HP
4.20.62 show logging
Command:
show logging { | error | info | warning } [ switch ]
show Show running system information
logging Syslog
Logging ID
switch Switch
Switch ID list in 1
Default:
N/A
Usage Guide:
To display the Syslog information.
Example:
To display the Syslog information with Log ID 235861.
Switch # show logging 235861
Switch : 1
ID : 235861
Level : Warning
Time : 1970-01-01T13:33:57+00:00
Message:
Loop Detected: Port 5 shut down
4.20.63 show loop-protect
Command:
show loop-protect [ interface ( [ ] ) ]
show Show running system information
loop-protect Loop protection configuration
interface Interface status and configuration
Default:
N/A
Usage Guide:
To display the Loop protection information.
-341-