PLANET WGSW-48040HP - Manual (Page 108)

Command Guide of WGSW-48040HP
To configure PD Ping Alive Check retry count of PoE for specific interface.
Example:
To configure PD Ping Alive Check retry count (5) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe pdcheck retry-count 5
4.2.45.75 poe power limit
Command:
poe power limit { }
poe Power Over Ethernet.
power Setting maximum power for port in allocation mode.
limit The maximum power.
Maximum power for the interface (0-15.4 Watt for PoE
standard mode, 0-30.0 Watt for PoE plus mode)
Default:
2
Usage Guide:
To configure maximum power of PoE for specific interface.
Example:
To configure maximum power (29 watts) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe power limit 29
4.2.45.76 poe priority
Command:
poe priority { low | high | critical }
poe Power Over Ethernet.
priority Interface priority.
critical Set priority to critical.
high Set priority to high.
-108-