KEPCO MBT Series - Manual (Page 74)

3-36
MBTSVC111609
6. Enter 1 (it is not necessary to key in insignificant zeroes, e.g., for 0.010, key in .01).
7. Press ENTER.
8. Press Iadj.
9. Enter 2.1 and press ENTER.
10. Press to display Sc: 1.
11. Press DELAY (SEC).
12. Enter 20 and press ENTER.
NOTE: Steps 13 through 19 apply only to MR and MGR Models.
13. Press to display Sc: 2.
Const VOLT = 1
0.0V 0.00A
NOTE: If you make a mistake entering the value, press ENTER to confirm the incorrect
value, then repeat steps 5 and 6 to correct the voltage. This applies any time the
wrong value is keyed. If you press CLEAR ENTRY you will exit the Program mode,
and the display will return to either “Output is OFF” or “Keyboard control.”
Pr#2 Stp: 0 Sc:0
1.0V 0.00A
Curr limit =
1.0V 0.00A
Pr#2 Stp: 0 Sc:0
1.0V 2.10A
Pr#2 Stp: 0 Sc:1
Delay = 0.1s
Delay =
Delay = 0.1s
Pr#2 Stp: 0 Sc:1
Delay = 20s
Pr#2 Stp: 0 Sc:2
Voltage mode Pr#2 Stp: 0 Sc:2
Current mode or