Solare Datensysteme Solar-Log - Manual (Page 61)

61
Chint Power
Chint Power (CPS 20k+)
Procedure
1. Insert the RJ45 plug into any RJ45 socket on inverter 1.
2. Insert the other end of the wire into any RJ45 socket on inverter 2.
3. Connect the other inverters to each other in the same way.
4. Terminate in the last inverter in accordance with the inverter instructions.
5. Allocate communication address.
Allocate communication address
•
Recommendation: Continuous numbering starting with 1.
•
Address range: 1 - 32
•
Setting: Using the inverter operating display
•
Procedure: Start according to the inverter's instructions