Solare Datensysteme Solar-Log - Manual (Page 16)

16
Connections
RJ45
1�2 RJ45
Some inverter manufacturers use RJ45 jacks on their units.
The pin assignments are manufacturer-specific.
Connect the RS485/422 B and/or the RS485 interface of the Solar-Log TM in accordance with the descripti-
on on the particular inverter. The details are described in detail in a separate manual..
Refer to the following document for the numbering of the pins for the RJ45 connection.
Figure 1: RJ45 plug pin assignments
Caution
Risk of damage to the unit!
The Solar-Log™ also has an RJ45 socket, which must never be connected to the RJ45
socket on the inverter.
► Only connect inverters via the RS485/422 Solar-Log™ interface(s)�