Solare Datensysteme Solar-Log - Manual (Page 198)

198
Santerno
Santerno
Procedure
1. Insert the Santerno inverter data cable plug into socket B of the first inverter.
2. Insert the Santerno inverter data cable plug into socket C of the first inverter.
3. Insert the plug on the other end of the cable into socket C of the second inverter.
4. Connect the other inverters to each other using socket C.
5. Terminate in the last inverter.
Connect socket A on the Santerno Solar Log™ data cable to the plug of the first Santerno data cable.
Allocate communication address
•
Recommendation: Continuous numbering starting with 1.
•
Setting: Using the inverter operating display
•
Procedure: Start according to the inverter's instructions