TA Triumph-Adler DC 2060 - Manual (Page 79)

Copying Functions
1-73
Original Size
Specify the original size as follows.
1 Press [Edit]. On the next screen, press
[Select Orig.Size] ([Select Size Orig.]).
2 Select the original size. Refer to Original
Size on page 1-3 for details.
3 Press [Close].
Repeat Copy
Specify Repeat Copy as follows. Use Repeat Copy to enable the production of additional copies as
needed after a copy job is completed.
1 Press [Edit]. On the next screen, press
[Repeat Copy].
NOTE: The Repeat Copy setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2 Press [On] to activate Repeat Copy.
Refer to Repeat Copy on page 1-42 for
details.
3 Press [Close].
Ready to Job build.
Job Build
Off
Border
Auto
Basic Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margin/
Centering
Select of
Repeat
Erase Copy
Output
Ready to Job build.
Select
11x8½"
8½x5½"
5½x8½" 11x17"
Other
Input size
Auto 8½x14"
8½x11"
11x15"
8½x13½"
8½x13"
A4
Back Select Original Size
Place originals then press Start key.
A4
Custo
stand.Size
2x2 "
2x2 "
2x2 "
2x2 "
size
Ready to Job build.
Job Build
Off
Border
Auto
Basic Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margin/
Centering
Select of
Repeat
Erase Copy
Output
Place originals then press Start key.
Back Repeat Copy
Ready to Job build.
Repeat copy allows sets to be save
to the HDD.
Using Repeat Copy function,
jobs can be recalled and output.
Individual passwords can be set.
Off
On