TA Triumph-Adler DC 2060 - Manual (Page 74)

Copying Functions
1-68
One-Sided Copying or Duplexing
Select one-sided copying or duplexing as follows.
1 On the [Basic] screen, press
[1 sided/2 sided] ([1-sided/2-sided]).
NOTE: The setting for one-sided
copying or duplexing applies to all
other steps. Simply complete this
setting once as an initial step.
2 Press [1 sided Copy] ([1-sided Copy]) or
[2 sided Copy] ([2-sided Copy]) and
select the binding direction.
Follow the instructions at the right of the
touch panel and confirm the orientation
of the originals.
NOTE: Failure to place originals
correctly may result in copying errors.
3 Press [Close].
Processing of Finished Copies
Specify stacking of accomplished copies as follows. If your copier is equipped with the optional
document finisher, you can also specify stapling or hole punching.
1 On the [Basic] screen, press [Finished].
NOTE: The finish settings apply to all
other steps. Simply complete this
setting once as an initial step.
Ready to Job build.
Job Build
11x8½"
Select
1 sided
Basic Quality
Reduce
Rear
Orig. Set
Finished
2 sided Copy
Edit
1 sided copy-Left
Finished page #:
Step
Auto %
Original
Place originals then press Start key.
Direction
1 sided/
2 sided Paper Type
/Enlarge
Place originals then press Start key.
Back
Select Original Ima
1 sided
2 sided
Direction.
Top Edge
1 sided/2 sided Copy
Ready to Job build.
Finished
Open from
Open from
Open from
left
right
top
Copy
Copy
Function Optional Equipment Description
Stacking Document finisher: None Each completed set is rotated 90 ° before
stacking.
Document finisher: Installed Stacked by the document finisher.
Stapling Document finisher: None Stapling is not available.
Document finisher: Installed Stapling is available.
Center margin
stapling Document finisher: None Center margin stapling is not available.
Document finisher: Installed
Folding unit: None Center margin stapling is available.
Document finisher: Installed
Folding unit: Installed Center margin stapling as well as center
margin with center folding is available.
Punching Document finisher: None Punching not is available.
Document finisher: Installed
Punching unit: Installed Punching is available.
Ready to Job build.
Job Build
11x8½"
Select
1 sided
Basic Quality
Reduce
Rear
Orig. Set
Finished
2 sided Copy
Edit
1 sided copy-Left
Finished page #:
Step
Auto %
Original
Place originals then press Start key.
Direction
1 sided/
2 sided Paper Type
/Enlarge