TA Triumph-Adler DC 2060 - Manual (Page 60)

Copying Functions
1-54
Originals of Different Widths
Place all originals of different widths.
NOTE: This setting is only available for metric models.
The supported combinations of originals are as follows.
• A3, B4, A4 and B5
• B4, A4R and B5
• Folio, A4R and B5R
NOTE: Place originals flush against the document width guide toward the back of the copier.
Follow the steps as below for automatic paper selection.
1 Place originals in the document processor.
IMPORTANT: When placing the originals of different
widths, be sure to flip up the original guide on the
document processor.