TA Triumph-Adler DC 2060 - Manual (Page 106)

System Settings
3-6
Adjusting Background Intensity
If the background on copies appears too dark, you can lighten it.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Background
exp. adj and press [Change #].
3 Press [Lighter] or [Darker] to adjust the
intensity.
4 Press [Close]. The touch panel will return to the Copy Default screen.
Adjusting Thin Lines
Depending on the using environment, paper or original, dragged stains may appear around
horizontal thin lines in some cases. To eliminate these stains, use the [Thinner] setting in this option.
NOTE: Copies are somewhat lighter in this mode.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Thin Line
adjustment and press [Change #].
3 Press [Thinner] or [Thicker] to adjust the
line thickness.
System Menu / Counter
System Menu
Copy Default
Exposure Mode
Exposure Steps
Default menu Setting mode
Original Image Quality
EcoPrint
Background exp. adj.
Manual
Change #
1 step
Text + Photo
Off
Standard
Background exp. adj. Back
Able to adjust exposure of paper background.
Lighter Darker
System Menu Copy Default -
System Menu / Counter
System Menu
Copy Default
Default menu Setting mode
Thin Line adjustment Change # 4
Exposure Steps
Original Image Quality
EcoPrint 1 step
Text + Photo
Off
Background exp. adj. Standard
Thin Line adjustment Back
Copy Default System Menu
Make adjustments if thin lines do not appear clearly
Images may lighten if adjusted to make lines thinner
Thinner Thicker
-