TA Triumph-Adler DC 2060 - Manual (Page 128)

System Settings
3-28
3 Use [+] to increase the time or [-] to
decrease the time from 1 to 240
minutes.
4 Press [Close]. The touch panel will return to the Machine Default screen.
Setting Low-Power Timer Timeout
Specifies the period of time before the copier enters Low-Power mode.
The Low-Power time can be set from 1 to 240 minutes in 1-minute increments.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [S] or [T] to select Low power
mode chng. time and press [Change #].
3 Use [+] to increase the timeout or [-] to
decrease the time out from 1 to 240
minutes.
4 Press [Close]. The touch panel will return to the Machine Default screen.
Setting Auto Clear Timeout Time
Automatically clears all temporary settings on the operator panel when no operation is made on the
operator panel. Those settings revert to the default settings after the predetermined period of time.
You can specify the period after copying before the copier automatically clears the previous
settings.
The auto clear timeout can be set from 10 to 270 seconds in 10-second increments.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
Sleep mode changing time Back
System Menu
Set Changing time to turn automatically into sleep mode
after last setting,or when copying is done.
Machine Default
Minute
-
90
System Menu
Machine Default
Default menu
Special paper action mode
Orig. Set Direction
Change #
Sleep mode changing time
Low power mode chng. time
System Menu / Counter
Setting mode
Adjust print direction
Rear
Minute
Minute
Select paper type(2sided)
15
90
Low power mode chng. time Back
System Menu
Set Changing time to turn autom. into low power mode
after last setting,or when copying is done.
Machine Default
Minute
-
15