TA Triumph-Adler DC 2060 - Manual (Page 163)

Job Accounting
4-3
Accessing the Job Accounting Screen
Set up job accounting from the Job Accounting screen. Follow these steps to access the Job
Accounting screen.
1 Press the System Menu/Counter key.
2 Press [Job Accounting].
3 Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6000 for 60
cpm model and 8000 for 80 cpm model.
The Job Accounting screen will be
displayed.
NOTE: For security, it is recommended to change the management code. Refer to Changing
Management Code on page 3-32.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model.
Proceed to the following section to customize job accounting menus.
System Menu / Counter
Job
System Menu
Management
BOX
Report
Print
Language
MP tray
Orig. Size
Register
Management
Document
Default
Machine
Default
Copy
Setting
Accounting
Enter the administrator number.