TA Triumph-Adler DC 2060 - Manual (Page 149)

System Settings
3-49
Hard Disk Management
The HDD Management screen arrows you to check the free space on the hard disk or delete the
unwanted data to free up the space. Follow these steps.
1 Press the System Menu/Counter key.
2 Press [BOX Management] ([Hard Disk
Management]).
3 Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6000 for 60
cpm model and 8000 for 80 cpm model.
The HDD management mode (HDD
management) screen will be displayed.
NOTE: For security, it is recommended to change the management code. Refer to Changing
Management Code on page 3-32.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model.
4 To check the free space on the hard disk
and the total capacity, press [On] under
Check HDD capacity (on the left side of
the touch panel).
To delete the unwanted data, press [On]
under Delete invalid data (on the right
side of the touch panel).
5 Press [Close]. The touch panel will return to the System Menu screen.
System Menu / Counter
Job
System Menu
Management
BOX
Report
Print
Language
MP tray
Orig. Size
Register
Management
Document
Default
Machine
Default
Copy
Setting
Accounting
Enter the administrator number.
Close
management mode
ent mode
apacity
he free space and capacity
On
Delete invalid data
Delete invalid data in the HDD.
On