HEIDENHAIN IK 5494-2D - Manual (Page 91)

69
3
Quick Start
Demonstration
Measuring features
In this example, the perimeter and the three holes of the QC Quickie slide
will be measured using the Buffer, New and Circle probes and Measure
Magic. A detailed description of measuring features is provided by
Chapter 5: Chapter 5: Measuring ing.
Measure the perimeter starting with the arc in the top
left corner of the part. In this example the New probe is
used to click and drag a probe and measure the arc.
Continue measuring perimeter features in a clockwise direction using the Buffer and New probes until the
entire slide perimeter is measured, and then measure the three holes using the Circle probe.
The final measurement steps are shown in the Program template
window.
Click, drag and fire the New probe to measure the top-left arc faeture
Measuring Features