HEIDENHAIN IK 5494-2D - Manual (Page 378)

356 QC5200 Series User’s Guide
Probable cause #2
• The video probes are not properly calibrated
Recommended solution #2
• Calibrate the video probes using the material contained in Chapter 4: Probes. Chapter 4: Probes.
Problem
An axis counts in the wrong direction
Probable cause
• The polarity (reversed) setting is incorrect
Recommended solution
• Use the Tools/Options/Encoder tab to enter
the correct encoder polarity by changing the
Reverse setting.
Reverse
encoder
polarities