HEIDENHAIN IK 5494-2D - Manual (Page 4)

QC5200 Series User’s Guide
Video edge detection systems: QC5200, QC5210, QC5230, and QC5240
Printed in the United States of America
All information set forth in this document, all rights to such information, any and all inventions disclosed
herein and any patents that might be granted by employing the materials, methods, techniques or apparatus
described herein are the exclusive property of Metronics Inc., Bedford, New Hampshire.
Terms, conditions and features referenced in this document are subject to change without notice
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permis-
sion of Metronics, Inc.. Requests to Metronics, Inc. for permission should be addressed to the Technical
Services Department, Metronics, Inc., 30 Harvey Road, Bedford, New Hampshire 03110. The Technical
Services Department can be reached by phone at (603)-622.0212.
Limit of liability and disclaimer of warranty
While Metronics, Inc. exercised great care in the preparation of this book, Metronics makes no representa-
tions or warranties with respect to the accuracy or completeness of the contents of this book and specifi-
cally disclaims any implied warranties of merchantability or fitness for a particular purpose. The advice,
methods and instructions contained in this book might not be suitable for your situation. When in doubt
regarding suitability, you are encouraged to consult with a professional where appropriate. Metronics
shall not be liable for any loss of profit or any damages, including but not limited to special, incidental,
consequential or other damages.
Trademarks
Metronics is a registered trademark of Metronics, Inc. and its subsidiaries in the United States and other
countries and may not be used without written permission. Other trademarks are the property of their
respective owners.
Metronics part number: 11A10558
Publishing date: June, 2005