HEIDENHAIN TNC 360 ISO Programming - Manual (Page 218)

11-19 TNC 360
11 Tables, Overviews, Diagrams
11.5 Features, Specifications and Accessories
Programmable Functions
Contour elements
Straight line, chamfer, circular arc, circle center, circle radius, tangentially
connecting arc, corner rounding.
Program jumps
Subprogram, program section repeat, main program as subprogram.
Fixed cycles
Pecking, tapping (also with synchronized spindle), rectangular and circular
pocket milling, slot milling, milling pockets and islands from a list of
subcontour elements.
Coordinate transformations
Datum shift, mirroring, rotation, scaling factor.
3D Touch Probe System
Probing functions for measuring and datum setting, digitizing 3D surfaces
(optional, only available with HEIDENHAIN plain language programming).
Mathematical functions
Basic operations +, –, . and %, trigonometric functions
sin, cos, tan and arctan.
Square roots ( a ) and root sum of squares ( a
2 + b 2 ).
Logical comparisons greater than, smaller than, equal to, not equal to.
TNC Specifications
Block execution time 1500 blocks/min (40 ms per block)
Control loop cycle time 6 ms
Data transfer rate Max. 38400 baud
Ambient temperature 0°C to 45°C (operation)
–30°C to 70°C (storage)
Traverse Max. ± 30 m (1181 inches)
Traversing speed Max. 30 m/min (1181 ipm)
Spindle speed Max. 99 999 rpm
Input resolution As fine as 1 µm (0.0001 in.) or 0.001°