Grass Valley Xpanel Vertigo Suite v.4.8 - Manual (Page 69)

Xpanel User Manual 4-35
Building and editing panels
7. Optional - Select the D EFAULT L IST property and specify which channel(s) the Channel
Selector will have selected by default.
8. Optional - If you would like the ability to gang channels, then set the D ISPLAY H OLD
B UTTON property to T RUE . This produces a H OLD button within the Channel Selector so
that you can select multiple channels in Production mode.
N OTE
As an alternative to adding and using the Hold button, operators can right-click on the
Channel Selector’s channel buttons in Production mode to select multiple channels.
9. In the V IEW T YPE property, select one of the following settings to determine the format
of the channel selector:
10. Be sure to return to the other objects on the panel and set their C HANNELS property’s
C HANNEL S ELECTOR field (see page 4-32 ).
N OTE
Once the panel is built and the objects are appropriately associated with the Channel
Selector, see
“Selecting channels using a Channel Selector” on page 7-5 for instructions on
how to use the Channel Selector in Production mode.
Standard (Default) - The Standard view shows the channels as defined in the
C
HANNEL L IST property. The channel groups as defined in the
station configuration are ignored.
Grouped The Grouped view shows all the channels defined in the current
station configuration and groups them according to the groups in
the station configuration. A User section can also be used to define
a channel group during operation. The C
HANNEL L IST property is
ignored in this mode.
Working The Working view shows a list of most recently used channels from
another channel selector. The M
ASTER C HANNEL S ELECTOR
property must be set to the main channel selector. The C HANNEL
L IST property is ignored in this view.