Grass Valley Xpanel Vertigo Suite v.4.8 - Manual (Page 31)

Xpanel User Manual 3-7
Creating and loading a station configuration
5. Add devices to the device columns by dragging the appropriate devices from the
Station Manager’s Device List and dropping them onto the channel’s device columns.
N
OTE
A device can only be assigned to one channel. When a device is added to a channel, the
device becomes disabled (grey) in the Station Manager’s Device List to indicate that it is
already dedicated to a channel. If that device is required by another channel, you must first
remove it from its present channel. See
“Removing a device assignment from a channel”
on page 3-7 .
6. Save the channel to the station configuration by clicking the S AVE S TATION button
in the Station Manager’s toolbar.
Removing a device assignment from a channel
A device can only be assigned to one channel, so if that device is required by another
channel, you must first remove it from its present channel.
To remove a device assignment from a channel:
1.
Right-click on the channel cell that contains the device and select the R EMOVE DEVICE
command.
2. Click the S AVE S TATION button in the Station Manager’s toolbar.
Removing a channel from a station configuration
To remove a channel from a Station Configuration:
1.
Right-click anywhere within the channel and select the R EMOVE CHANNEL command.
2. Click Y ES when prompted to confirm that you want to remove the channel.
The channel is immediately removed from the station configuration.
3. Click the S AVE S TATION button in the Station Manager’s toolbar.