Grass Valley Xpanel Vertigo Suite v.4.8 - Manual (Page 124)

7-6 Xpanel User Manual
Operating panels in Production mode
N OTE
When the panel is loaded, one or several channel buttons may already be selected if the
Channel Selector’s D
EFAULT L IST property was set.
There are two methods for ganging channels in a Channel Selector:
•
If the D ISPLAY H OLD B UTTON property was set to T RUE , a H OLD button will appear within
the Channel Selector. Select the H OLD button, then click the channels that you would
like to gang together. The first channel selected appears in red and is designated as
the Master Channel, while the others appear in white and are the slave channels.
Or,
•
If the Channel Selector does not have a H OLD button (D ISPLAY H OLD B UTTON property
was set to F ALSE ), you can right-click on the Channel Selector’s channel buttons in
Production mode to select multiple channels.