Grass Valley Trinix v.2.4.1 - Manual (Page 78)

Planning Guide
78 Planning and Installation Manual
Specifications
Electrical
General
Connectors: 75 ohm BNC
Input cards: 32 inputs each.
Output cards: 32 outputs each.
Matrix cards: DM-33100: 128 inputs x 128 outputs.
DM-33512: 256 inputs x 256 outputs.
For additional information about the various input, output,
and matrix cards available for Trinix, see
page 83 .
Video Inputs
Level: 800 mV p-p (+/-10%) 75 ohm terminating
Return loss: HD: >/=15 dB from 5 MHz to 1.5 GHz
SD: >/=15 dB from 5 MHz to 540 MHz
Sync Inputs
Level: Nominal 1 Vp-p (+/-6 dB) video or black burst.
Tri-level sync also accepted
Video standard: NTSC/PAL/HDTV, auto-detected
Return loss: >/=40 dB from 100 kHz to 20 MHz
>/=30 dB from 20 MHz to 30 MHz
Video Outputs
Level: 800 mV p-p +/-10% 75 ohm
Return loss: >/=15 dB from 5 MHz to 1.5 GHz (except Monitor outputs)
Performance Characteristics
Maximum data rate: 1.5 Gbps
Minimum data rate: 3.072 Mbps
Signal standards:
SMPTE 292M-1998,
1
SMPTE 259M-1997
1
(Output rise and
fall times correspond to SMPTE 292M)
Equalization: SI-33110 Input Card (SD): automatic up to 300 meters of
Belden 1694A, 250 meters of Belden 8281 or equivalent coax
cable for SD equalizer at 270 Mbps. Reducing to 150 meters
at 540 Mbps.
1. See Glossary