Grass Valley Trinix v.2.4.1 - Manual (Page 205)

TRX-VI-33100 Module
Planning and Installation Manual 205
Figure 121. Summary of timing setup for NTSC, showing setup for all 16 inputs. PAL display
is similar. (Only Input 0 is connected in this example.)..
Timing -
--------------------------------------------------------------------------------
Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
================================================================================
Horizontal Timing:
0.0 to 857.5 pixels (0.5 steps) for 525
0.0 to 863.5 pixels (0.5 steps) for 625
--------------------------------------------------------------------------------
+---------------------------- Channel Line Rate ----------+
| |
| +-------------------- Horizontal (pixels) |
+-------+--------------------------------------------------------------------+--
0, 000.0 525
1, 000.0 N/A
2, 000.0 N/A
3, 000.0 N/A
4, 000.0 N/A
5, 000.0 N/A
6, 000.0 N/A
7, 000.0 N/A
8, 000.0 N/A
9, 000.0 N/A
a, 000.0 N/A
b, 000.0 N/A
c, 000.0 N/A
d, 000.0 N/A
e, 000.0 N/A
f, 000.0 N/A
Press: '0 ~ 9' or 'A ~ F' to select channel to edit.
Press: 'M' to move/copy channel configuration.
Press: 'Z' to set ALL channels to factory defaults.
Press 'ESC' to return to Main Menu.
When an input (channel) is selected, the display will show the values
for that particular channel:
Figure 122. Timing setup menu for one channel (NTSC shown).
Timing -
--------------------------------------------------------------------------------
Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
================================================================================
Selected - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
--------------------------------------------------------------------------------
Horizontal Timing:
0.0 to 857.5 pixels (0.5 steps) for 525
0.0 to 863.5 pixels (0.5 steps) for 625
--------------------------------------------------------------------------------
+---------------------------- Channel Line Rate ----------+
| |
| +-------------------- Horizontal (pixels) |
+-------+--------------------------------------------------------------------+--
0, 000.0 525
To Decrement/Increment Horizontal position press: 'F'/'G'.
Press: 'ESC' to ABORT changes and return to the previous Menu.
Press: 'Enter' to ACCEPT changes and select a different channel.
Press: 'Y' to revert back to last settings.
Press: 'Z' to set THIS channel to factory defaults.