Grass Valley Trinix v.2.4.1 User Manual

Page 199

TRX-VI-33100 Module

Planning and Installation Manual

199

Figure 115. Setup composite video menu for NTSC, showing setup for all 16 inputs. PAL

display is similar. (Only Input 0 is connected in this example.)

Video Composite In -

--------------------------------------------------------------------------------

Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)

================================================================================

Disable (Off) 0 Video Decode Mode: Input Video Gain:

Enable (On) 1 No filter 1 50.0 to 200.0% (0.5% steps)

Comb filter 2

Trap filter 1.20 3

Trap filter 0.87 4

Trap filter 0.72 5

Trap filter 0.50 6

--------------------------------------------------------------------------------

+------------------------------------- Channel Line Rate -------+

| |

| +--------------------------------- Monochrome Input (On/Off) |

| | +----------------------------- Remove Setup from Video (On/Off) |

| | | +------------------------- Chroma Kill (On/Off) |

| | | | | | | | |

+---+---+---+---+---+---+-------+--------------------------------------------+--

0, 0, 0, 0, 2, 1, 100.0, 1 525

1, 0, 0, 0, 2, 1, 100.0, 1 N/A

2, 0, 0, 0, 2, 1, 100.0, 1 N/A

3, 0, 0, 0, 2, 1, 100.0, 1 N/A

4, 0, 0, 0, 2, 1, 100.0, 1 N/A

5, 0, 0, 0, 2, 1, 100.0, 1 N/A

6, 0, 0, 0, 2, 1, 100.0, 1 N/A

7, 0, 0, 0, 2, 1, 100.0, 1 N/A

8, 0, 0, 0, 2, 1, 100.0, 1 N/A

9, 0, 0, 0, 2, 1, 100.0, 1 N/A

a, 0, 0, 0, 2, 1, 100.0, 1 N/A

b, 0, 0, 0, 2, 1, 100.0, 1 N/A

c, 0, 0, 0, 2, 1, 100.0, 1 N/A

d, 0, 0, 0, 2, 1, 100.0, 1 N/A

e, 0, 0, 0, 2, 1, 100.0, 1 N/A

f, 0, 0, 0, 2, 1, 100.0, 1 N/A
Press: '0 ~ 9' or 'A ~ F' to select channel to edit.

Press: 'M' to move/copy channel configuration.

Press: 'Z' to set ALL channels to factory defaults.

Press 'ESC' to return to Main Menu.

When an input (channel) is selected, the display will show the values

for that particular channel. For example, selecting “0” will display the

values for channel 0:

Figure 116. Composite video setup menu for one channel (NTSC shown).

Video Composite In -

--------------------------------------------------------------------------------

Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)

================================================================================

Selected - Input 0: Line Rate: 525 Line Type: NTSC (M, J)

--------------------------------------------------------------------------------

Disable (Off) 0 Video Decode Mode: Input Video Gain:

Enable (On) 1 No filter 1 50.0 to 200.0% (0.5% steps)

Comb filter 2

Trap filter 1.20 3

Trap filter 0.87 4

Trap filter 0.72 5

Trap filter 0.50 6

--------------------------------------------------------------------------------

+------------------------------------- Channel Line Rate -------+

| |

| +--------------------------------- Monochrome Input (On/Off) |

| | +----------------------------- Remove Setup from Video (On/Off) |

| | | +------------------------- Chroma Kill (On/Off) |

| | | | | | | | |

+---+---+---+---+---+---+-------+--------------------------------------------+--

0, 0, 0, 0, 2, 1, 100.0, 1 525
To Disable/Enable Monochrome Only Input; press: 'Q'.

To Remove/Insert Setup from Video; press: 'E'.

To Enable/Disable Chroma Kill; press: 'R'.

To Set Video Decode Mode; press: 'T'.

To Disable/Enable AGC; press: 'D'.

To Decrement/Increment Input Video Gain; press: 'F'/'G'.

To Disable/Enable ACC; press: 'C'.

Press: 'ESC' to ABORT changes and return to the previous Menu.

Press: 'Enter' to ACCEPT changes and select a different channel.

Press: 'Y' to revert back to last settings.

Press: 'Z' to set THIS channel to factory defaults.