Grass Valley Trinix v.2.4.1 User Manual
Page 165
Planning and Installation Manual
165
9.
The Configure Network Page (
) will be displayed:
Figure 94.
IP Address - this field assigns an IP address to the primary NR-
33000.
Note
This address must end with an even number. If an odd number is
entered, it will automatically be changed to the next higher number. The
secondary board will automatically be given the same IP address as the
primary board, plus 1.
Subnet Mask - typically 255.255.255.0 (Class C net with no subnet-
ting).
Target Name (SMS control only) - Name used by SMS 7000 control
system for router. This name can be up to eight characters, but the
last character must be a “1.” (The Secondary NR will automatically
be given the same name with “2” as the last character.)
Primary Controller IP (Encore control only) - Enter the address of
the Master System Controller Board.
Secondary Controller IP (Encore redundant control only) - Enter
the address of the Mirror System Controller Board.
Gateway IP - used only if the Trinix is connected to the Broadlinx
PC through a gateway.
Time Server IP (optional, network time server address).
If you don't know what values to enter consult your network
administrator. Your parameters will differ from those of the figure.
10.
The SNMP Device ID is the MAC address of the NR-33000. Used
when obtaining license for SNMP/NetCentral monitoring. For
more information, see