beautypg.com

Broadlinx – Grass Valley Trinix v.2.4.1 User Manual

Page 22

background image

Introduction

22

Planning and Installation Manual

ability of individual parts, enhance air movement throughout the

chassis, and identify potential system problems in time to take preven-

tive measures.
Trinix also offers Broadlinx technology, which aids serviceability by

providing status displays and monitoring functions through a network

connection.

All circuit boards contain some common circuitry for hot swapping, cir-

cuitry for DC to DC conversion, and a micro-controller as part of the

Broadlinx technology.

Hot swap circuitry is used to simplify field servicing and upgrades.

The DC to DC conversion is necessary because the chassis design dis-

tributes one voltage, 48 volts, to all cards leaving the responsibility to

each card to convert down to the needed voltage level.

Each board has a micro-controller that is part of an overall communica-

tions bus which is part of the hardware for the Broadlinx technology.

This hardware is what gathers all of the particular board information

(voltages, signal presence, reclocking settings, etc.) as well as enables

the firmware updates via network connection.
For “protected path” operation, the Broadlinx software can be config-

ured to monitor router outputs that are feeding critical downstream

equipment (such as a transmitter). If the “primary” output signal is

interrupted, the system will automatically select the “secondary”

output that is carrying the same signal and trigger a system alarm. Pro-

tected path operation is available for single-chassis (non-expanded)

systems only, with the exception of multi-chassis DV-33512 routers

with expanded inputs. Protected path operation also requires HO-

33120 HD/SD Output Boards in the paths to be protected. For more

information, see

page 60

.

Broadlinx

The Broadlinx option, which consists of Broadlinx software running on

the NR-33000 Sync/NIC/OPM board, allows SMS 7000 or Encore

control using Grass Valley CPL (Control Point Language) through an

Ethernet connection.

Broadlinx also provides web pages for the following operations:
• Network configuration of the NR-33000 board(s)
• Downloading of software upgrades to the various boards in the

system

• System monitoring using Internet Explorer