Viewing clip options, Displaying super out information on output/monitor – Grass Valley K2 AppCenter v.7.2 User Manual
Page 78

78
K2 AppCenter User Manual
05 April 2010
Chapter 5 Playing and editing clips
Viewing clip options
Clip options allow you to choose which audio channels to monitor.
To view the options of a clip loaded in Player:
• Select
Control | Options.
Displaying Super Out information on output/monitor
If licensed for AppCenter Pro or Elite, you can display information on a channel’s
SDI OUT2 signal and on the VGA video monitor.
1. Click
System | Monitor Options
.
The Monitor Options dialog box opens.
2. Select the tab for the channel that plays the video with the information you are
displaying.
3. Do one or both of the following:
• To display information on the VGA video monitor for the channel, select the
checkbox above
Monitor
.
• To display information on the channel’s SDI OUT2, select the checkbox above
SuperOut
.
4. Select the checkbox for each type of information you are displaying.
5. From the drop-down list, select the location to display the information.
6. Configure other channels as follows: