Grass Valley K2 AppCenter v.7.2 - Manual (Page 67)

05 April 2010 K2 AppCenter User Manual
67
Loading media for playout
Loading media for playout
You can load clips or programs in the play display for playout.
NOTE: Loading a clip from a bin into a play channel changes the working bin
for that channel.
Loading clips from the clips pane
1. Select a play channel by clicking in the channel’s monitor pane.
2. Locate the clip in the clips pane. If necessary, change bins by clicking the current
bin control and selecting from the drop-down list.
3. Load the clip in one of the following ways:
• Drag the clip from the clips pane into the play channel.
• Choose the
Load
button in the clips pane, then select the clip.
• Double-click on the clip.
• Select the clip, then press
Enter
on the keyboard.
Loading a clip from the Player application
1. Select a play channel by clicking in the channel’s monitor pane.
4
Countdown Timecode Displays the time remaining in the clip. To select the countdown
mode you want to monitor, open the Options dialog box by selecting
Options in the context menu.
5 View tabs These tabs toggle between Control view and Cue Points view.
Player Menu Add Cue – Used to add a cue to a clip:
1. In the Control view, start the clip playing.
2. Select the Cue tab.
3. At the desired timecode, select
Control | Add Cue .
Remove – Used to remove a cue.
Rename - Used to rename a cue.
Create Clip – Creates a sub clip from highlighted cue points.
Create All– Creates sub clips from all cue points.
Cue Selection – cues the first selected cue point for playback
showing a still frame of video for the cue point.
E-to-E (LoopThru) mode
– When selected, the following occurs:
“EE” is displayed on the channel pane, next to the Timecode Source
indicator; when no clip is loaded, the signal that is currently present
at the channel input plays out; when a record operation stops the clip
remains in the Recorder. The signal that is currently present at the
channel input plays out.
Control Description and User Operation
Control
Cue