Grass Valley K2 AppCenter v.7.2 - Manual (Page 158)

158
K2 AppCenter User Manual 05 April 2010
Chapter 10 Audio/Video Configuration
Record channel audio setup
On the K2 Summit Production Client or K2 Solo Media Server, available settings
change depending on the audio input selected, as in the following sections:
• “AES/EBU audio setup”
• “Embedded audio setup”
AES/EBU audio setup
To access record channel audio settings, open Configuration Manager, click
Channel
,
and select a player/recorder channel.
a. Changing video input format does not require a restart of the K2 system. If changing between SD and
HD, however, there is a wait time up to 24 seconds for each recorder channel after clicking the OK button
in Configuration Manager.
For this setting... Configure as needed…
Audio input type AES/EBU Makes settings available as documented in this table.
Number of audio
inputs 2 Makes the following setting(s) available below:
A1/A2 input format
4 Makes the following setting(s) available below:
A1/A2 input format
A3/A4 input format.
6 Makes the following setting(s) available below:
A1/A2 input format
A3/A4 input format.
A5/A6 input format
8 Makes the following setting(s) available below:
A1/A2 input format
A3/A4 input format.
A5/A6 input format
A7/A8 input format
A1/A2 input format 16-bit PCM
24-bit PCM
AC-3
Dolby-E
A3/A4 input format
Timing offset Between -200ms and +200ms. The default value is 0 ms.
Audio Input Tags Add tags for languages or other purposes to this channel’s audio tracks. Refer
to
“Adding audio tags” on page 180 .
Display audio
meters Select System | Monitor Options , select the Display the Following
Channel Status radio button, and and check the Audio Monitors box