Grass Valley K2 AppCenter v.7.2 - Manual (Page 55)

05 April 2010 K2 AppCenter User Manual
55
Changing the timecode source
Removing a cue point
1. While recording, click on the Cue tab.
2. Select a cue point in the list.
3. Do one of the following:
• Click t he
Remove
button, or
• Select
Control | Remove
.
Renaming a cue point
1. While recording, click on the Cue tab.
2. In Cue view, select a cue point in the list.
3. Select
Control | Rename.
4. Use the text entry dialog to enter a new cue name, then click
OK
or press
Enter
.
Changing the timecode source
To change the timecode source:
1. Click on the channel whose timecode you want to specify.
2. Select
Control | Options
. The Options dialog box displays.
3. Select the
Timecode
tab.
4. Choose a timecode source, then click
OK
.
Timecode Source Description
AncVITC Available on HD channels only. Timecode is read from ancillary VITC.
VITC Available on SD channels only. Timecode is read from the VITC input for the
channel.
LTC Available on HD/SD channels.Timecode is read from the LTC input for the
channel.
Timecode
Source Timecode
Display