Configuring 3d/video + key – Grass Valley K2 AppCenter v.7.2 User Manual
Page 191

05 April 2010
K2 AppCenter User Manual
191
Configuring 3D/Video + Key
• Video and Key tracks must be the same compression format.
• Video or Left Eye must be connected to the channel’s SDI IN1 and Key or Right
Eye must be connected to the channel’s SDI IN2.
• SDI IN1 and SDI IN2 must be frequency locked with each other
• Audio is limited to eight embedded tracks or eight AES tracks recorded per
channel, recorded from SDI IN1.
• When a channel is configured as a 3D/Video + Key play channel, agile playback
and transition effects are not supported on the channel.
• 3D/Video + Key clips may be DVPRO or AVC-Intra formats. Refer to
specifications later in this manual for supported formats.
• Off-speed play faster than 1x not recommended for on-air use. Occasional video
glitches can occur
• Super Out is not supported on a channel configured for 3D/Video + Key.
• 3D/Video + Key is not compatible with TimeDelay.
• One or more 3D/Video + Key channels can be a part of an AppCenter channel
gang, but the “Record/play same clip on all channels of Gang” feature is not
available for that gang.
Configuring 3D/Video + Key
This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite
license.
1. Open Configuration Manager, click
Channel
, and select a channel tab.