Grass Valley K2 AppCenter v.7.2 - Manual (Page 57)

05 April 2010 K2 AppCenter User Manual
57
Renaming a clip
1. Make sure the record channel is selected.
2. Click the drop-down list showing the clip’s location, choose a bin.
-- or --
3. From the main menu, select
Control | Options.
4. Click the Bin & AFD tab, then choose a bin from the list.
You can also change the working bin by loading a clip into a channel (for example,
by using drag-and-drop) from a bin that is not the current working bin for that channel.
The bin from which you loaded the clip then becomes that channel’s working bin.
Renaming a clip
You can rename a clip during or after recording.
To rename a clip:
1. Select the clip name control in the Recorder application.
2. Enter the new clip name using the on-screen keyboard.
3. Click
OK
, or press
Enter
.
If a clip with the new name already exists in the current bin, an error message is
displayed.
Viewing clip properties
To view the properties of a clip loaded in the Recorder application:
In the Record application, do one of the following: