Grass Valley K2 AppCenter v.7.2 - Manual (Page 157)

05 April 2010 K2 AppCenter User Manual
157
Record channel video setup
To access record channel video settings, open Configuration Manager, click
Channel
,
and select a channel.
For this setting... Configure as needed…
Type If licensed for AppCenter Elite you can configure the channel to be a
ChannelFlex Suite Channel. When you do so, settings change accordingly.
Refer to
Chapter 13, ChannelFlex Suite .
Name If desired, enter a name for the channel.
Input format
a
NTSC (SD) or PAL (SD) NTSC or PAL available depending on video
reference standard setting. Selecting a SD
format makes the following setting(s) available
below:
VITC Input
720p Makes the following setting(s) available below:
Ancillary data timecode inputs
1080i Makes the following setting(s) available below:
Ancillary data timecode inputs
Compression
format DV25
DV50
DVCAM
DV100 Based on codec option cards, HD licensing
options, and input format additional settings are
available. For more information, see
“Operational Specifications” on page 203 .
Input type SDI K2 Summit Production Client and K2 Solo
Media Server are SDI only.
Video input Video input present If 720p or 1080i selected:
Green LED indicates input is present.
Black LED indicates input is not present.
Ancillary data
timecode inputs Ancillary LTC
present
Ancillary VITC
present
Automatic VITC
detection On If SD is selected, the following setting(s) are
available below:
Starting VITC line
Ending VITC line
Off If SD is selected, the following setting(s) are
available below:
VITC line 1
VITC line 2
Starting VITC line
-or-
VITC line 1
NTSC: Between 10 and 20
PAL: Between 6 and 22
Ending VITC line
-or-
VITC line 2
NTSC: Between 10 and 20.
PAL: Between 6 and 22
AFD Settings Generate AFD on output:
Never
When Known
Always For more information on the different AFD
settings, see
“Applying AFD settings” on
page 154 .