Grass Valley K2 AppCenter v.7.2 - Manual (Page 73)

05 April 2010 K2 AppCenter User Manual
73
Editing a clip
3. In the Confirm Mark Change window, click
Yes
.
Moving clip marks: Using the timecode entry controls
1. In Control view, select the mark-in or mark-out timecode control to
open the timecode entry dialog box.
2. Enter a timecode value, then click
OK
or press
Enter
.
Alternatively: Use the current position scrub bar in the timecode entry
dialog box to locate the desired frame, then select
OK
.
Moving clip marks: Using the clip length control
Entering a new clip length moves the mark-out point.
1. Click the
Length
timecode entry control .
2. Enter a new clip length and click
OK
.
The clip length changes by moving the mark-out point.
Clearing mark-in/mark-out points
Clearing a mark point resets the mark to its default position— mark-in is set to the
beginning of available media; mark-out is set to the last frame of available media.
To clear a mark point, do one of the following:
• In Play view, click and hold the
In
or
Out
button, then choose
Clear Mark
in the
pop-up menu.
• In Play view, select the mark-in or the mark-out timecode control and click
Clear
,
then
OK
to clear the mark.
Adjusting clip audio level
The audio meter display provides audio level adjustment for clips loaded in the player
display. Saved audio levels are used every time the clip is loaded and played. Unsaved
changes are lost when the clip is ejected.
To adjust audio level:
1. In the Player application, click the Meter bar button.
2. Adjust the audio level in one of the following ways:
• Adjust the graphical faders individually or “ganged,” which ensures all channels
use the same gain.
• Click
Unity
to set audio back to the last saved level.