Grass Valley K2 AppCenter v.7.2 - Manual (Page 162)

162
K2 AppCenter User Manual 05 April 2010
Chapter 10 Audio/Video Configuration
Data track setup
To access data track settings, open Configuration Manager, click
Channel
, select a
player/recorder channel and a video input format, and scroll down to locate
Data Track
settings.
Timecode setup
To access timecode settings, open Configuration Manager and click
System
.
Refer to “Video reference standard setup” on page 156 for other settings that appear
on the System tab.
For this setting... Configure as needed…
Record ancillary
data Yes A data track is created. Ancillary data packets are stored.
If SD selected above, the following setting becomes
available:
Record uncompressed VBI and captioning to data track
No If 720p or 1080i selected above. A data track is not created.
Ancillary data packets are not stored.
Record
uncompressed
VBI and
captioning to data
track Yes If SD selected above.
If Yes, the following setting becomes available:
Uncompressed VBI Lines
No (Profile
Compatible) If SD is selected above.
Uncompressed
VBI lines Yes
No If SD selected above.
Luma lines: 10-22
Chroma Lines: 10-22
For this setting... Configure as needed…
Time of Day Time of day
source System Clock This settings uses the Windows
operating system clock. If you select
this source you should verify that
the clock’s time is correct.
LTC Input Choose if using LTC timecode.
Makes the following setting(s)
available below:
Time of day LTC source
Time of day
LTC source C1
C2
C3
C4 Select which channel you want to
use as the Time of Day source. (For
Solo, C1 or C2.)