Grass Valley K2 AppCenter v.7.2 - Manual (Page 71)

05 April 2010 K2 AppCenter User Manual
71
Using cue points for playback
Viewing the cue list
1. Select a play channel by clicking in the channel’s monitor pane.
2. Select the Cue tab.
The Cue view appears showing the cue list for the clip loaded in the Player
application. Initially, only the mark-in and mark-out cue points are listed.
Adding a cue point
NOTE: To add a cue point while Recording, see “Adding a cue point while
recording” on page 54 .
While the clip is playing or in the stop mode, use the transport controls to find the
desired frame in the clip, then do one of the following:
• Click t he
Add Cue
button.
• Select
Control | Add Cue
.
A cue point is added to the cue list using a unique name, e.g. Cue_1. Using the
preview feature, you can play and add cue points to a clip while it is still being
recorded.
Removing a cue point
1. In Cue view, select a cue point in the list.
2. Do one of the following:
• Click t he
Remove
button, or
• Select
Control | Remove
.
Jump to the selected cue point
Use the following steps to jump to the selected cue point.
1. In Cue view, select a cue point in the list.
• Click t he
Goto
button, then select
Selection
.
2. Press the
Play
button on the onscreen transport controls
Playout starts from the cued frame.
Jump to the next cue point
Use the following steps to jump to the next cue point. Depending on the current play
position, the clip will cue to the next cue point in the clip.
1. In Cue view, click the
Goto
button, then select
Next Cue
.
2. Press the
Play
button on the onscreen transport controls.
Playout starts from the cued frame.
Renaming a cue point
1. In Cue view, select a cue point in the list.