Embedded audio setup, Audio input type, Embedded – Grass Valley K2 AppCenter v.7.2 User Manual
Page 159: Number of audio inputs, Embedded input group(s), A1/a2 input format, Bit pcm, Ac-3, Dolby-e, A15/a16 input format

05 April 2010
K2 AppCenter User Manual
159
Embedded audio setup
Embedded audio setup
To access record channel audio settings, open Configuration Manager, click
Channel
,
and select a player/recorder channel.
Play channel video setup
NOTE: If you are using a channel suite with channels from multiple K2 Summit
Production Clients, make sure that you have selected a channel from the K2 Summit
Production Client that you want to configure before accessing Configuration
Manager.
For this setting...
Configure as needed…
Audio input type
Embedded
Makes settings available as documented in this table.
Number of audio
inputs
2
Makes the following setting(s) available below:
Embedded input group(s): Group 1, Group 2,
Group 3, Group 4.
A1/A2 input format
4
Makes the following setting(s) available below:
Embedded input group(s): Group 1, Group 2,
Group 3, Group 4.
A1/A2, A3/A4 input formats
6
Makes the following setting(s) available below:
Embedded input group(s): Group 1 & 2, Group 3 & 4.
A1/A2
through A5/A6 input formats
8
Makes the following setting(s) available below:
Embedded input group(s): Group 1 & 2, Group 3 & 4.
A1/A2
through A7/A8 input formats
12
Makes the following setting(s) available below:
Embedded input group(s): Groups 1, 2, 3.
A1/A2
through A11/A12 input formats
16
Makes the following setting(s) available below:
Embedded input group(s): Group 1, 2, 3, 4.
A1/A2
through A15/A16 input formats
Embedded input
group(s)
Selections available are dependent on “Number of audio inputs” setting above.
A1/A2 input format
16-bit PCM
24-bit PCM
AC-3
Dolby-E
.
.
.
A15/A16 input
format
Timing offset
Between -200ms and +200ms. The default value is 0 ms.
Audio Input Tags
Add tags for languages or other purposes to this channel’s audio tracks. Refer
to
“Adding audio tags” on page 180
Display audio
meters
Select
System | Monitor Options
, select the
Display the Following
Channel Status
radio button, and and check the
Audio Monitors
box