Grass Valley K2 AppCenter v.7.2 - Manual (Page 192)

192
K2 AppCenter User Manual 05 April 2010
Chapter 13 ChannelFlex Suite
2. For Type, select
3D / Video + Key Recorder
or
3D / Video + Key Player
.
3. If you selected 3D / Video + Key Recorder, enter names as follows:
a. For Name, enter a name to identify SDI IN1.
b. For Aux Name, enter a name to identify SDI IN2.
4. If you selected 3D / Video + Key Player, enter names as follows:
a. For Name, enter a name to identify SDI OUT1.
b. For Aux Name, enter a name to identify SDI OUT2.
5. Configure remaining channel settings as appropriate. Refer to Chapter 10, Audio/
Video Configuration .
ChannelFlex Suite supported combinations
The overall load on system resources must be considered when using multiple inputs
and outputs per channel on multiple channels, as each input/output stream consumes
system resources. FTP transfers, off-speed play, and media drive rebuilds also
consume system resources, so they must be considered as well. The channel
combinations illustrated below are typical applications that maximize ChannelFlex
Suite channels. These combinations have been qualified by Grass Valley, with the
following considerations:
• These combinations assume an HD format with 100 Mbps data rate, which
produces the highest possible load on system resources. If you use a format with a